Ford Fusion DIY Remote Start Systems at MotorCityAutobahn.com

Wiki Article

Take your installation into the fast lane for your Ford Fusion with a DIY Remote Starter kit from MotorCityAutobahn.com. True vehicle-specific systems, with no plugs or harnesses to sort through meant for other Ford models, no computer programming, or manuals to download before installation. No detours. Just a direct route from delivery to your Explorer following our step-by-step installation guide we mapped VIper Remote Start System out for you."

Ford Fusion DIY Remote Start Installation Overview for Key and Push-Button Start Ignitions.

Plug-In T-Harness Installation

One Plug-to-Vehicle DIY T-Harness Installation. The system simply plugs in behind the vehicle's OBD2 port mounted at the lower left edge of the driver's side dash.

No OBD2 Port Blocking

You won't lose normal access to your vehicle's OBD2 port. No unplugging the remote start system every time the vehicle's OBD2 port is needed for vehicle service or additional accessories.

No Computer Programming Required

No vehicle-specific computer programming or manual downloads required. Just go straight from delivery to your vehicle for installation.

No Key or System-to-Vehicle Programming Procedures

No sequence of buttons to press or time-sensitive key programming procedures involved. Just plug the system in and turn the ignition on and off to activate the system.

No Battery Disconnect Required

You don't have to disconnect and reconnect the vehicle's battery for installation, so there's no inconvenience of having to reset your vehicle's menu settings.

Step-by-Step Installation Manual

Included hard copy of our step-by-step installation guide.

Report this wiki page